Jancy JB2400 Tube and Pipe Bender
The JB2400’s solid steel construction is balanced on a set of heavy duty casters and built around a 110v/25A 3HP Baldor motor. These features make this a very durable and mobile machine, suitable for use almost anywhere. The 35 second cycle time for 180 degree bends makes the JB2400 a highly productive machine. The JB2400 has an auto stop feature which allows for repeatable parts production and decreased scrap. The JB2400 is capable of producing 180 degree single shot bends, with no ratcheting or pins required. It’s 2” sch. 40 capacity easily satisfies most job requirements.
Features
- Made in the USA
- All steel construction
- 110v/25A, 220v/15A - 3hp Baldor motor
- 2” sch. 40 pipe capacity, 1.5”–8”CLR (center line radius)
- Auto stop feature for repeatability
- No complicated electronics to program
- 180 degree bend capacity in one shot
- 35 second cycle time for 180 degree bend
- No tooling required to change forming and pressure dies
- Bend pipe, round & square tubing, solid round & flat stock
- On casters for portability
- 18 month warranty
Bending capacities of select materials
- Pipe (I.D.) 2" Schedule 40
- Tube (O.D.) 2-1/2" .095"
- Chromoly 2-1/4" .083"
- Square tube 2" x 2" .125"
- Flat stock 1/4" x 2"
- Solid rod (O.D.) 1"
- Aluminum (O.D.) 2" .125"
- Stainless (O.D.) 2" .093"
Applications
- Handrails
- Roll cages
- Off-road accessories
- Furniture
- Custom motorcycles
- Snowboard, skateboard park equipment
- Metal conduit
- Process plumbing
Specifications
| Capacity | 2" Schedule 40 pipe |
| Height | 52" |
| Length | 36" |
| Maximum Bend | 180 degrees |
| Maximum Bend Speed | 35 sec. at 180 deg. |
| Maximim CLR | 8" |
| Minimum CLR | 1.5" |
| Motor | 15A - 220v - 1hp - 60 cycle |
| Motor | 25A - 110v - 1hp - 60 cycle |
| Weight | 625 lbs. |
| Width | 28" |