Deep Throat Bench Punch
This accurate punch is ideal for prototype, short production runs
and model shops. The adjustable die shoe permits the proper alignment of close
fitting punches and dies to accommodate very thin materials, as well as heavier
stock. The option of a cabinet base, and a 12" square gauge work table to extend
their usefulness and is provided with standard equipment as indicated below.
* Maximum Rated Capacity:*
4 tons
* Linear Hand Operation
* Deep Throat (Punch holes up to 12" from edge of material)
* Work Heavy to Ultra Light Materials
* Do not, under any condition, exceed the rated capacity of this tool.
Dimensions
| Reference | No. 218 | Reference Chart | |
|---|---|---|---|
| In. | MM | ||
| A | 21 1/2 | 546.1 |  |
| B | 17 5/8 | 447.68 | |
| C | 12 1/4 | 311.15 | |
| D | 4 1/2 | 114.3 | |
| E | 2 1/16 | 52.39 | |
| F | 3/4 | 19.05 | |
| G | 5 | 127 | |
| H | 24 | 609.6 | |
Punches and Dies
| Type O | Type M | Type N | Type P | Type R | Type S | Type T | Type D | |
|---|---|---|---|---|---|---|---|---|
| No. 218 | 1/8 - 2 | 1/8 x 3/16 - 3/16 x 2 | 1/8 x 3/16 - 1 x 1 1/2 | 1/8 x 3/16 - 3/4 x 2 | 1/8 - 1 5/16 | 5/32 - 1 7/16 | 5/32 - 1 7/16 | 5/32 x 1/8 - 2 x 1 7/8 |
Auxiliary Attachments
