Medium Duty Bench Punch
Medium Duty Bench Punches are similar in operating design and
capacity to the Medium Duty Roller Bearing Portable Punches described
here.
However, in addition to stationary mounting, they also provide greater throat
dimensions and a slightly broader range of punch and die sizes.
* Maximum Rated Capacities:*
No. 16 - 7.3 tons
No. 17 - 5 tons
* Linear Roller Bearing Cam Operation
* Standard and Deep Throat Options (up to 6 1/2")
These two punches are similar in use, yet slightly different in their construction
detail. The No. 16, with its solid forged frame, has the higher rated capacity and
a standard throat. The No. 17 steel frame punch provides a deeper throat dimension
to punch up to 6 1/2 inches from the edge of a work piece. Both punches have adjustable
die shoes to permit the proper alignment of close fitting punches and dies to punch
light gauge materials. Both also have the option of a removable 6" x 8" work table
with stops to position material in the tool.
* Do not, under any condition, exceed the rated capacity of this tool.
Dimensions
| Reference | No. 16 | No. 17 | Reference Chart | ||
|---|---|---|---|---|---|
| In. | MM | In. | MM | ||
| A | 8 7/16 | 214.31 | 12 3/8 | 314.33 |  |
| B | 9 5/8 | 244.48 | 10 9/16 | 268.29 | |
| C | 3 1/4 | 82.55 | 6 1/2 | 165.1 | |
| D | 1 3/4 | 44.45 | 2 1/8 | 53.98 | |
| E | 7/8 | 22.23 | 7/8 | 22.23 | |
| F | 3/8 | 9.53 | 3/8 | 9.53 | |
| G | 3 7/8 | 98.43 | 4 1/2 | 114.3 | |
| H | 24 1/2 | 622.3 | 24 1/2 | 622.3 | |
Punches and Dies
| Type O | Type M | Type N | Type P | Type R | Type S | Type T | Type D | |
|---|---|---|---|---|---|---|---|---|
| No. 16 & 17 | 1/16 - 9/16 | 1/8 x 1/4 - 3/8 x 9/16 | 1/8 x 1/4 - 1/4 x 1/2 | 1/8 x 1/4 - 3/8 x 9/16 | 1/8 - 3/8 | 3/16 - 15/32 | 3/16 - 15/32 | 3/16 x 1/8 - 9/16 x 1/2 |