Light Duty Portable Punch
Light Duty Portable Punches are for limited punching power (1.2 tons or less.)
They're easy to carry in the pocket, on a belt or in a tool box. Hardened, machined bearing
surfaces are used in these tools to provide dependable long life within the rated capacity.
* Maximum rated capacity: 1.2 tons
* Smallest available
* Hand operation
* Adjustable stop gauge
The No. 5 Jr. punch has a standard 1 3/4-inch throat depth, while the No. XX has a deep throat
configuration to punch up to 3 1/4-inch from the edge. The No. XX may be used to punch light
channels with 1" minimum inside dimension and 1 3/8" maximum flange. Both punches have optional
mounting bases, and are also available as kits with a standard assortment of round punches and
dies in a durable plastic box.
* Do not, under any condition, exceed the rated capacity of this tool.
Dimensions
| Reference | No. 5 Jr | No. XX | Reference Chart | ||
|---|---|---|---|---|---|
| In. | MM | In. | MM | ||
| A | 8 1/4 | 209.55 | 10 1/4 | 260.35 |  |
| B | 3 3/4 | 96.84 | 6 3/8 | 161.93 | |
| C | 1 3/4 | 44.45 | 3 1/4 | 82.55 | |
| D | 7/16 | 11.11 | 2 1/8 | 53.98 | |
| E | 5/16 | 7.94 | 9/16 | 14.29 | |
| F | 9/32 | 7.14 | 9/16 | 14.29 | |
| G | 1 13/32 | 35.72 | 1 5/8 | 41.28 | |
Punches and Dies
| Type O | Type M | Type N | Type P | Type R | Type S | Type T | Type D | |
|---|---|---|---|---|---|---|---|---|
| No. 5 Jr. | 1/16 - 9/32 | 1/8 x 3/16 - 1/4 x 9/32 | 1/8 x 3/16 - 5/32 x 7/32 | 1/8 x 3/16 - 1/4 x 9/32 | 1/8 -3/16 | 5/32 - 7/32 | 5/32 - 7/32 | 3/16 x 1/8 - 9/32 x 1/4 |
| No. XX | 1/16 - 17/32 | 1/8 x 3/16 - 7/16 x 1/2 | 1/8 x 3/16 - 5/16 x 3/8 | 1/8 x 3/16 - 7/16 x 1/2 | 1/8 - 17/64 | 3/16 - 3/8 | 3/16 - 3/8 | 3/16 x 1/8 - 17/32 x 1/2 |
Additional Images
