CLM 350 SA Column Style Cold Saw
- Rigid Column Design
- Hydraulic Operated Vise with Anti-Burr Device
- Hydraulic Operated Power Down Feed
- Hydraulic Feed Pressure Reducing Valve
- Head Miters 45 degrees
- Two Cutting Speeds:
LT (Low Turn) =12 RPM and 25 RPM or
HT (High Turn) = 25 RPM & 50 RPM - Emergency Stop Button
- 30" Material Length Stop
- Steel Stand
- Five Gallon Coolant System with Chip Collection Tray
- Way Lubrication System
- One 14" diameter (350 mm) High Speed Steel Blade
- One Blade Wrench
- One Gallon Concentrated Coolant
- 230 or 460 Volt /3 Phase Electrics (must specify voltage)
- Two-Year Warranty (Parts Only)
Exception: One-year Warranty on Hydraulic & Electrical Parts - Made in USA
Capacities and Specifications
| Cutting Speeds | LT (Low Turn) 15 and 30 RPM designed for solid mild steel, solid stainless steel & thick wall pipe | |
| Cutting Speeds | HT (High Turn) 30 and 60 RPM designed for thin wall tube and non-ferrous materal | |
| Motor Rate | Low RPM 2.5 hp | High RPM 3.3 hp |
| Blade Motor | 1.9 kW | 2.5 kW |
| Factory Wired | Specify 208 3 ph 220 3ph 440 3 ph 60 hz | |
| TUBING Round Square Rectangle SOLID Round Square | 90 Degree 4-1/2" 4" x 4" 6" x 4" 90 Degree 4" 4" x 4 | 45 Degree 4" 4" x 4" 5" x 4" 45 Degree 3" 3" x 3" |
| Maximum Diameter Blade | 14" | 350 mm |
| Arbor Bore | 1-9/16" | 40 mm |
| Vise Opening | 6-3/4" | 170 mm |
| Pin Spacing | 4/12/64 | |
| Width | 36" | |
| Depth | 42" | |
| Height | 78" | |
| Shipping Weight | 1,100 lbs. |