CPO 275 Cold Saw
- Manual Double Self-Centering Vise Assures Burr-Free Cuts
- Operator Controlled Trigger Switch
- Miter Capabilities 135 degrees, 90 degrees Left and 45 degrees Right
- Miter Locking Device stops at 45 Degrees Left, Straight 90 Degrees, and 45 Degrees Right
- Capable of Slotting
- Two Cutting Speeds
- Hardened and Ground Worm and Wheel Gear Box
- Worm Wheel of Top Quality Bronze
- 7 Gallon Coolant Tank with Pump
- 30" Material Length Stop
- One 10" Diameter (250 mm) HSS Blade
- One Blade Wrench
- One Gallon Concentrated Coolant
- 230 or 460 Volt/3 Phase Electrics (must specify voltage)
- Warranty: One Year Parts
- Made in USA
Capacities and Specifications
| Cutting Speeds | Must Specify when Ordering | |
| LT(Low Turn) designed for solid mild steel, solid stainless steel & thick wall pipe |
LT (Low Turn) 30 rpm 60 rpm |
Motor rate: 2 hp |
| LT (Low Turn) variable speed drive 15 to 90 rpm | Motor rate: 2 hp | |
| HT(High Turn) designed for thin wall tube and non-ferrous material |
HT (High Turn) 60 rpm 120 rpm |
Motor rate: 2 hp |
| HT (High Turn) variable speed drive 30 to 150 rpm |
Motor rate: 2 hp |
|
| SS(Single Speed) designed for 220v 1 ph applications | SS (Single Speed) 60 rpm |
Motor rate: 2 hp |
| Factory Wired | Specify 208 3 ph 230 3 ph 460 3 ph 575 volt 3 ph 60 hz 220 1 ph (SS Model Only) |
|
| Maximum Diameter Blade | 10-3/4" | 275 mm |
| Arbor Bore | 1-1/4" | 32 mm |
| Pin Spacing | 2/8/45 | |
| Width | 21-7/8" | |
| Depth | 43-1/2" | |
| Height not including handle | 53-1/4" | |
| Height from floor to vise | 36-1/8" | |
| Shipping Weight | 600 lbs. | |
| TUBING Round Square Rectangle |
90 Degree 3-3/8" 3" x 3" 3-1/2" x 2-3/8" |
45 Degree 2-3/4" 2-5/8" x 2-5/8" 2-5/8" x 2-5/8" |
| SOLID Round Square |
90 Degree 1-1/2" 1-1/2" x 1-1/2" |
45 Degree 1" 1" x 1" |