CPO 275 PKPD Cold Saw

  • Semi-Automatic Cycle
  • Pneumatic Power Down Feed with Electric Controls
  • Separate Feed Control of both Feed Rate and Feed Pressure
  • Power Double Self-Centering Vise Assures Burr-Free Cuts
  • Emergency Stop Button
  • Miter Capabilities 135 degrees, 90 degrees Left and 45 degrees Right
  • Capable of Slotting
  • Two Cutting Speeds
  • Hardened and Ground Worm and Wheel Gear Box
  • Worm Wheel of Top Quality Bronze
  • 7 Gallon Coolant Tank with Pump
  • 30" Material Length Stop
  • One 10" Diameter (250 mm) HSS Blade
  • One Blade Wrench
  • One Gallon Concentrated Coolant
  • 230 or 460 Volt/3 Phase Electrics (must specify voltage)
  • Warranty: One Year Parts
  • Made in USA
CPO 275 PKPD Cold Saw
Spacer Image

Capacities and Specifications

Cutting Speeds Must Specify when Ordering
LT(Low Turn) designed for solid mild steel, solid stainless steel & thick wall pipe LT (Low Turn)
30 rpm
60 rpm		 Motor rate:
2 hp
LT (Low Turn)
variable speed
drive 15 to 90 rpm 		Motor rate:
2 hp
HT(High Turn) designed for thin wall tube and non-ferrous material HT (High Turn)
60 rpm
120 rpm		 Motor rate:
2 hp
SS(Single Speed) designed for 220v 1ph applications SS (Single Speed)
60 rpm 		Motor rate:
2 hp
Factory Wired Specify
208 3 ph
230 3 ph
460 3 ph
575 volt 3 ph 60 hz
220 1 ph (SS Model Only)
Maximum Diameter Blade 10-3/4" 275 mm
Arbor Bore 1-1/4" 32 mm
Pin Spacing 2/8/45
Width 21-7/8"
Depth 43-1/2"
Height not including handle 53-1/4"
Height from floor to vise 36-1/8"
Shipping Weight 600 lbs.
TUBING
Round
Square
Rectangle

SOLID
Round
Square 		90 Degree
3-3/8"
3" x 3"
3-1/2" x 2-3/8"

90 Degree
1-1/2"
1-1/2" x 1-1/2"		 45 Degree
2-3/4"
2-5/8" x 2-5/8"
2-5/8" x 2-5/8"

45 Degree
1"
1" x 1"
Spacer Image
Spacer Image