CPO 350 NF PK Cold Saw
- Power Double Self-Centering Vise Assures Burr-Free Cuts
- Operator Controlled Trigger Switch
- Miter Capabilities 135 degrees, 90 degrees Left and 45 degrees Right
- Miter Locking Device: Quick, Accurate Settings-Stops at 45 degrees Left, Straight 90 degrees, and 45 degrees Right
- Capable of Slotting
- Two Cutting Speeds
- Positive Cog Belt Driven
- One Gallon Coolant Tank with Mist Lubrication System
- 30" Material Length Stop
- One 13-1/2" Diameter (338 mm) Carbide Tipped Blade
- One Blade Wrench
- One Gallon Concentrated Coolant
- 230 or 460 Volt/3 Phase Electrics (must specify voltage)
- Warranty: One Year Parts
- Made in USA
Capacities and Specifications
| Cutting Speeds | 1,500 rpm | 3,000 rpm |
| Motor Rate | Low rpm 3 hp | High rpm 3.8 hp |
| Factory Wired | Specify 208 3 ph 230 3 ph 460 3 ph 575 3 ph 60 hz |
|
| Maximum Diameter Blade | 14" | 350 mm |
| Arbor Bore | 1-9/16" | 40 mm |
| Pin Spacing | 4/12/64 | |
| Width | 21-7/8" | |
| Depth | 21-7/8" | |
| Height not including handle | 56-1/4" | |
| Height from floor to vise | 37-7/16" | |
| Shipping Weight | 675 lbs. | |
| TUBING Round Square Rectangle SOLID Round Square |
90 Degree 4-1/2" 4-1/4" x 4-1/4" 5-1/2" x 4" 90 Degree 3" 3" x 3" |
45 Degree 4-1/2" 4" x 4" 4" x 4" 45 Degree 2-1/2" 2-1/2" x 2-1/2" |