Porta-Fab 45 Ironworker
- 45-ton punch station (1-1/8" in 1/2")
- Keyed punch ram for safety
- 4-1/4" throat depth
- 2" die holder
- Punch nut with wrench and stripper
- One round punch & die: max. diameter 1"
- Adjustable electric stroke control with scale
- Three-in-one combination tool - Angle shear capacity: 3" x 3" x 5/16" at 90 degrees and 2" x 2" x 1/4" at 45 degrees. - Bar shear capacity: 3/8" x 6" - Rod shear capacity: 3/4" Round
- Tool table work area
- Machine stand with punch & die & tooling storage rack
- 110 volt / 1-ph electrics
- All guards necessary to comply with ANSI B 11-5 standards
- One-year warranty
- Made in the USA
Capacities and Specifications
| Punching Capacity | 45 Ton | 1-1/8" in 1/2" 41 mt 28 in 12 mm |
| Special Tooling | 2-1/4" Max. Dia. | 57 mm Max. Dia. |
| Throat Depth | 4-1/4" | 108 mm |
| Flat Bar Shear | 6" Length 1/2" x 4" 3/8" x 6" | 150 mm 12 x 100 10 x 150 |
| Angle Shear 90° | 3" x 3" x 5/16" | 75 x 75 x 8 |
| Angle Shear 45° | 2" x 2" x 1/4" | 50 x 50 x 6 |
| Brake 8" | 25 Ton | 23 mt |
| Brake 12" | 20 Ton | 18 mt |
| Pipe Notcher Schedule | 40 I.D. | 3/4", 1" 1-1/4" 1-1/2", 2" 20, 25 32 38, 50 |
| Rectangle Notcher | 2" x 1-3/4" x 1/4" | 50 x 45 x 6 |
| 90° V. Notcher | 6" x 6" x 1/8" | 150 x 150 x 3 |
| Rod-Angle Combo Angle Shear Round Rod Square Rod |
2" x 2" x 1/4" 3/4" Max. 3/4" Max. | 50 x 50 x 6 20 Max. 20 Max. |
| Square Tube Shear | 1/2" to 1", 14 ga. | 12 x 25, 1.9 Max. |
| Picket Tool | 1/2", 3/4", 1", 16 ga. | 12, 19, 25 |
| Strokes per minute in light material |
1/4" Stroke | 20 spm |
| Strokes per minute in heavy material | 3/4" Stroke | 6 spm |
| Hydraulics | 1350 psi | 93 bar |
| Motor Standard | 2 hp 1 ph 110 | v1.49kW |
| Motor Optional | 2 hp 1 ph 220v | 1.49kW |
| Dimensions | W-17.63" L-35.75" H-38.75" | W-44.8 cm L-90.8 cm H-98.4 cm |
| Weight | 640 lbs. | 290 kg |