DO 150/240-24M Ironworker
- Dual Operator allows for Two Operators to Work at the Same Time at Full Capacity
- 150 Ton Punch Station (1-7/8" in 1")
- Keyed Punch Ram for Safety
- 12" Throat Depth
- Punch Gauging Table with Fence and Scale
- Die Holders: 2", 2-1/2", and 3"
- Punch Nut with Wrench
- Adjustable Swing-Away Stripper
- One Round Punch & Die: Max. Dia. 1-1/4"
- Punch Jog Control
- Two Electric Remote Foot Pedals
- Two Adjustable Electric Stroke Controls with Scale
- Two 2-Stage Hydraulic Pumps
- Two Valves
- Angle Shear Capacity 6" x 6" x 1/2"
- Rectangle Notcher 3" x 5-3/4" x 1/2"
- Notcher Table with Guides
- 240 Ton, 24" Flat Bar Shear with Sabre Blade (1" x 14", 3/4" x 24")
- Shear Table with Miter Fence
- Tool Table Work Area
- Slug Receptacles
- Electrical Box Supplied with Emergency Palm Button and Lock-out Tag-out Accommodations
- 230/460 Volt /3 Phase Electrics (must specify voltage)
- All Guards Necessary to Comply with
ANSI B 11-5 Standards - Forklift Accommodations
- One Year Warranty
- Made in USA
Capacities and Specifications
| Punching Capacity | 150 ton 1-7/8" IN 1" |
136 mt 48 IN 25 |
| Special Tooling | 4" Max. Dia. | 100 mm Max. Dia. |
| Throat Depth | 12" | 300 mm |
| Flat Bar Shear (Sabre Blade - Std) | 24" Length 1" x 14" 3/4" x 24" |
600 25 x 355 19 x 610 |
| Angle Shear 90° | 6" x 6" x 1/2" | 150 x 150 x 12 |
| Angle Shear 45° | 4" x 4" x 1/2" | 100 x 100 x 12 |
| Brake 12" | 75 ton | 55 mt |
| Brake 24" | 55 ton | 40 mt |
| Open End Brake | Max. 1/4" x 6" Flat or Angle Iron | 6 x 150 |
| Pipe Notcher Housing Schedule 40 I.D. | 3/4", 1", 1-1/4", 1-1/2", 2" |
19, 25, 32, 38, 50 |
| 90° V. Notcher | 6" x 6" x 5/16" | 150 x 150 x 8 |
| Notcher Rectangle V.Notch Notching in Leg of Channel |
3" x 5-3/4" x 1/2" 3" x 3" x 1/2" 6" to 10" |
75 x 145 x 12 75 x 75 x 12 150 to 250 |
| Channel Shear | 2" to 6" Adj. | 50 to 150 |
| Rod Shear Round Rod Square Rod |
1/4" to 1-1/4", 9 Cav. 1/4" to 1", 1 Cav. |
6 to 32 6 to 25 |
| Square Tube Shear | 1/2" to 2", 14 ga. |
12 to 50 |
| Picket Tool | 1/2", 3/4" & 1" | 12, 19, 25 |
| Offset Die Holder | Max. 40 ton | Max. 36 mt |
| Strokes Per Minute in Light Material | 1/4" Stroke | 20 spm |
| Strokes Per Minute in Heavy Material | 3/4" Stroke | 11 spm |
| Hydraulics | 2,500 psi | 172 bar |
| Motors | 10 hp 3 ph 230/460 208/380/575 |
8 kW |
| Motors Optional | 10 hp 1 ph 230v |
8 kW |
| Dimensions | W-34" L-77.25" H-74.25" |
W-119 L-174 H-187 cm |
| Weight | 6,400 lbs | 2,910 kg |