DO 70/110-24M Ironworker
- Dual Operator allows for Two Operators to Work at the Same Time at Full Capacity
- 70 Ton Punch Station (1-1/8" in 3/4")
- Keyed Punch Ram for Safety
- 9" Throat Depth
- Punch Gauging Table with Fence and Scale
- Die Holder Complete with 2" Die Insert
- Punch Nut with Wrench
- Adjustable Swing-Away Stripper
- One Round Punch & Die: Max. Dia. 1-1/4"
- Punch Jog Control
- Two Adjustable Electric Stroke Controls with Scale
- Two Electric Remote Foot Pedals
- Two 2-Stage Hydraulic Pumps
- Two Valves
- Angle Shear Capacity 6" x 6" x 1/2"
- Rectangle Notcher 3" x 5" x 3/8",
3" x 4" x 1/2' - Notcher Table with Guides
- 110 Ton, 24" Bar Shear with
Sabre Blade (1" x 6", 3/8" x 24") - Shear Table with Miter Fence
- Tool Table Work Area
- Slug Receptacles
- Electrical Box Supplied with Emergency Palm Button and Lock-out Tag-out Accommodations
- 230/460 Volt/3 Phase Electrics (must specify voltage)
- All Guards Necessary to Comply with
ANSI B 11-5 Standards - Forklift Accommodations
- One Year Warranty
- Made in USA
Capacities and Specifications
| Punching Capacity | 70 ton 1-1/8" IN 3/4" |
63 mt 28 IN 20 |
| Special Tooling | 4" Max. Dia. | 100 thru 5.5 |
| Throat Depth | 9" | 225 mm |
| Flat Bar Shear (Sabre Blade - Std) | 110 ton 24" Length 1" x 6" 3/4" x 10" 1/2" x 14" 3/8" x 24" |
100 mt 600 25 x 150 18 x 250 12 x 350 10 x 600 |
| Angle Shear 90° | 6" x 6" x 1/2" | 150 x 150 x 12 |
| Angle Shear 45° | 3" x 3" x 3/8" | 75 x 75 x 10 |
| Angle Shear 45° (with Bar Shear) | 4" x 4" x 1/2" | 100 x 100 x 12 |
| Brake 12" | 65 ton | 59 mt |
| Brake 24" | 45 ton | 40 mt |
| Open End Brake | Max. 1/4" x 6" Flat or Angle Iron | 6 x 150 |
| Pipe Notcher Schedule 40 I.D. | 3/4", 1", 1-1/4", 1-1/2", 2" |
19, 25, 32, 38, 50 |
| 90° V. Notcher | 6" x 6" x 5/16" | 150 x 150 x 8 |
| NOTCHER Rectangle V. Notch Notching in Leg of Channel |
3" x 5" x 3/8" 3" x 4" x 1/2" 3" x 3" x 3/8" 6" to 10" |
75 x 125 x 10 75 x 100 x 12 75 x 75 x 10 150 to 250 |
| Channel Shear | 2" to 6" Adj. | 50 to 150 Adj. |
| ROD SHEAR Round Rod Square Rod |
1/4" to 1-1/4", 9 Cav. 1/4" to 1", 1 Cav. |
6 to 32 6 to 25 |
| Square Tube Shear | 1/2" to 2", 14 ga. |
12 to 50 |
| Picket Tool | 1/2", 3/4" & 1" | 12, 19, 25 |
| Offset Die Holder | Max. 40 ton | 36 mt |
| Strokes Per Minute in Light Material | 1/4" Stroke | 25 spm |
| Strokes Per Minute in Heavy Material | 3/4" Stroke | 17 spm |
| Hydraulics | 2,500 psi | 172 bar |
| Motors Standard | 10 hp 3 ph 230/460 208/380/575 |
8 kW |
| Motors Optional | 10 hp 1 ph 220v |
8 kW |
| Dimensions | W-30" L-65" H-72-1/8" |
W-76 L-165 H-183 cm |
| Weight | 3,790 lbs. | 1,720 kg |