DO 95/140-24M Ironworker
- Dual operator allows for two operators to work at the same time at full capacity.
- 95-ton punch station (1-3/16" in 1")
- Keyed punch ram for safety
- 9" throat depth
- Punch gauging table with fence and scale
- Die holder complete with 2" die insert
- Punch nut with wrench
- Adjustable swing-away stripper
- One round punch & die: max. diameter 1-1/4"
- Punch jog control
- Two adjustable electric stroke controls with scale
- Two electric remote foot pedals
- Two hydraulic pumps
- Two valves
- Angle shear capacity: 6" x 6" x 1/2" at 90°
- Notcher table with guides
- 140-ton, 24" flat bar shear with sabre blade
- Shear table with miter fence
- Tool table work area
- Slug receptacles
- Electrical box supplied with emergency palm button and lock-out tag-out accommodations
- 230/460 volt / 3-ph electrics (must specify voltage)
- All guards necessary to comply with ANSI B 11-5 standards
- Forklift accommodations
- One-year warranty
- Made in the USA
Capacities and Specifications
| Punching Capacity | 95 ton (86 mt) 1-3/16" in 1" (27 mm in 25 mm) |
| Special Tooling | 4" Max. Dia. (100 mm through 5.5 mm) |
| Throat Depth | 9" (225 mm) |
| Flat Bar Shear (sabre blade-std.) |
140 ton, 24" Length, (127 mt, 609 mm) 1" x 8", 3/4" x 12" (25 x 203 mm, 18 x 304 mm) 1/2" x 16", 3/8" x 24" (12 x 406 mm, 10 x 609 mm) |
| Angle Shear 90° Angle Shear 45° (with Bar Shear) |
6" x 6" x 1/2" (150 x 150 x 12 mm) 3" x 3" x 3/8" (75 x 75 x 10 mm) 4" x 4" x 1/2" (100 x 100 x 12 mm) |
| Brake 12" Brake 24" |
80 ton (72.5 mt) 55 ton (50 mt) |
| Open End Brake | Max. 1/4" x 6" Flat or (6 x 150 mm) Angle Iron |
| Pipe Notcher Schedule 40 |
3/4", 1", (19 mm, 25 mm) 1-1/4", (32 mm) 1-1/2", 2" (38 mm, 50 mm) |
| 90° V-Notcher | 6" x 6" x 5/16" (150 x 150 x 8 mm) |
| Rectangle Notcher | 3" x 5" x 3/8" (75 x 125 x 10 mm) 3" x 4" x 1/2" (75 x 100 x 12 mm) |
| V-Notch | 3" x 3" x 3/8" (75 x 75 x 10 mm) |
| Notching in Leg of Channel | 6" to 10" (150 mm to 250 mm) |
| Channel Shear | 2" to 6" adj. (50 mm to 150 mm adj.) |
| Rod Shear Round Rod (Max.) Square Rod (Max.) |
1/4" to 1-1/4", 9 Cavity (6 mm to 32 mm) 1/4" to 1", 1 Cavity (6 mm to 25 mm) |
| Square Tube Shear | 1/2" to 2", 12 gauge (2.75 mm) |
| Picket Tool | 1/2", 3/4" & 1" (12 mm, 19 mm, 25 mm) 16 gauge (1.6 mm) |
| Offset Die Holder | Max. 40 ton (36 mt) |
| Strokes per minute in light material | 25 spm (1/4" stroke) [Punch Station] |
| Strokes per minute in heavy material | 17 spm (3/4" stroke) [Punch Station] |
| Hydraulics | 3,500 psi (241 bar) |
| Motor Standard | 10 hp 3 ph (7.46 kW) 230/460 208/380/575 |
| Motor Optional | 10 hp 1 ph (7.46 kW) 220 v |
| Dimensions | W-30" (76 cm) L-65" (165 cm) H-72 1/8" (183 cm) |
| Weight | 4,000 lbs. (1,814 kg) |