Structural Tools
Corner Trim Units
Radius trim corners of flat stock, sheet and angle iron.
Heavy duty, self contained, corner radius trim units can be used in punch presses,
iron workers or Vogel cage units, etc. to radius notch corners of flat stock, sheet
and angle iron. Standard inserts come with four radii. Special order large radii
(2 radii per set) inserts available. Units for heavier thicknesses (1/4" max) available (require pressure pads).
| Model | Capacity (Note A) | Size W/O Support | Size W/ Support | Approx. Weight |
Press Requirements | ||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Insert Set | Incl. Radii | Thick. | L to R | F to B | L to R | F to B | Shunt | Stroke | Tons | ||
| 37CT | 37-1 | 1/8, 3/16, 5/16, 7/16 | 1/8" | 5 | 5 | 8 1/4" x 13" | 8 1/4" x 13" | 15 | 4-1/4" | 1/2" | 4 |
| 37-2 | 1/4, 3/8, 1/2, 5/8 | ||||||||||
Angle Iron "V" Notch and Flat Stock Corner Notch Units
Angle Iron "V" Notch Units are Heavy Duty Self Contained Units with resharpenable inserts for making 90 degree Corners in Angle Iron and Flat Stock. Special Angles and larger sizes can be quoted, consult factory. "before and after" views showing how "V" notched angle iron is bent into a right angle corner.
| Model | Maximum Capacity | Size | Approx. Weight | Press Requirements | |||||
|---|---|---|---|---|---|---|---|---|---|
| Angle | Corner | Wall | L to R | F to B | Shunt | Stroke | Tons | ||
| 213 | 1-1/4" x 1-1/4" | 1-1/4" x 1-1/4" | .125" | 4-1/2" | 4-1/2" | 10 | 3-1/4"" | 1/4" | 10 |
| 215 | 3" x 3" | 3" x 3" | .375" | 10" | 10" | 95 | 6-1/8" | 1" | 80 |
| 216 | 4" x 4" | 4" x 4" | .500" | 12" | 12" | 170 | 8" | 1-1/4" | 110 |