VOGEL #25 & #25A ECONO ARC-FIT
Low cost, complete tool for notching thin-wall pipe, as used by the fence industry.
The Vogel Econo Arc-Fit notcher is for use with light wall pipe as typically used by the fence
industry. The Econo Arc-Fit is ideal for lower-volume notching, such as hobby and prototype work
or as an excellent starter tool for fence manufacturers.
For more versatility or when higher production of standard weight pipe is required, Vogel
recommends use of the heavy duty Arc-Fit method, as described above.
Vogel #25 Econo-Arc Fit comes complete, ready to use with 3 punches (see chart below).
Shipped less handle (use 1" standard pipe). All cutting members are high quality steel for
long life and may be replaced when worn.
The Vogel #25A Econo-Arc Fit is similar, but sized for rigid conduit. See chart below.
Specifications
| #25 for Notching | #25A For Notching | ||||
|---|---|---|---|---|---|
| Pipe Size | Approx. OD | Max. Wall | Conduit Size | OD | Max. Wall |
| 1" | 1-3/8" | .109" | 1/2" | .840" | .109" |
| 1-1/4" | 1-5/8" | .109" | 3/4" | 1.050" | .109" |
| 1-1/2" | 1-7/8" - 2" | .109" | 1" | 1.315" | .109" |