Double Notching 90° "T" Joints on Pipe and Tubing
The Vogel Arc-Twin notches both sides of pipe or tube ends for T-joints with only
one stroke of the press. There is no deformation, minimal burr, and the tool creates a slug, not
chips, so your part is ready for welding or brazing. Notching time per tube or pipe end is as fast
as you can load your part and cyle your press. Our Arc-Twin Self Contained Machines have an approx.
3 - 4 second cycle time. Tooling is easily changeable without removing the die from your press.
Tooling is designed to be sharpenable. An Arc-Twin can also be used for putting in slots, weep
holes, and other features than must be 180° opposed.
The Arc-Twin Tandem operates exactly like the Arc-Twin, but used an extra set of Die Inserts to
cut notching time in half and double the output. In other words, it notches two tube or pipe
ends at one time. Both die inserts can be the same or different sizes. The Arc-Twin Tandem can
also be used when you need to notch two different sizes frequently, and want to avoid down-time
for tooling changeover. Simply select the right or left side of the tool, based on what tooling
you've installed, and you're ready to notch your part.
Complete Self-Contained Arc-Twin Machines are the perfect choice when an appropriate press is
available or when a compact easily relocatable machine is desired.
Die Set
| Arc-Twin Die Set Models | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Model | Maximum Capacity | Size | Approx. Weight | Press Requirements | |||||||
| Pipe | Tube | Sq. | Wall | L to R | F to B | Shunt | Stroke | Tons | |||
| #101DS | 2" | 2-3/8" | 2" | .154" | 20" (27") | 8-1/2" | 160 | 7" | 3" | 30-45 | |
| #103DS (Tandem) | 2" | 2-3/8" | 2" | .154" | 20" (27") | 8-1/2" | 220 | 7" | 3" | 30-45 | |
| #300DS | 2-1/2" | 3" | 2-5/8" | .203" | 20" (30") | 11-1/2" | 350 | 9-1/2" | 6" | 45-60 | |
| #324DS | 2" X 4" Rectangular | 20" (30") | 11-1/2" | 350 | 9-1/2" | 6" | 45-60 | ||||
SELF-CONTAINED HYDRAULIC ARC-TWIN MACHINES
Our self-contained machines are perfect when you wish to create a compact
fabrication cell, or can devote your punch press to other higher-value work.
Don't have an appropriate press? Our Arc-Twin Machines are more economical, easier to relocate, and
easier to maintain than purchasing a traditional punch press to power an Arc-Twin Die Set Tool.
Is low labor costs and ease of use important? With our Arc-Twin Machine, it's virtually as easy as "1 - 2 - 3".
1. Insert Tube
2. Step on Foot Pedal
3. Remove Tube
Arc-Twin Self-Contained Machine Models
| Model | Maximum Capacity | Size | Approx. Weight | Unit Specifications | ||||
|---|---|---|---|---|---|---|---|---|
| Pipe | Tube | Sq. | Wall | L to R | F to B | |||
| #101 HP | 2" | 2-3/8" | 2" | .154" | 30" | 22" | 525 | 5 H.P. Motor 440V, 3 PH, 60 HZ 12 Gal Optional 220V Available |
| #301 HPP | 2-1/2" | 3" | 2-5/8" | .203" | 32" | 25" | 940 | 5 H.P. Motor 440V, 3 PH, 60 HZ 12 Gal Optional 220V Available |
| #501 HPP | 4-1/2" | 5" | 4-1/2" | .258" | 44-1/2" | 21" | 1100 | 10 H.P. Motor 440V, 3 PH, 60 HZ 30 Gal Optional 220V Available |